Product Details:
Model Number | RAYMI31001MSF3 |
Output | 0-10 VDC |
Supply Current | 5-20 mA |
Supply Voltage | 24 VDC |
Accuracy | +/-1.5% |
Temperature range | 250 to 1400 DegC |
Brand | RAYTEK |
Usage | Industrial |
Additional Information:
Product Details:
Brand | Raytek |
Model Number | RAYCMLTJ |
Temperature Range | -20 to 500 Deg C |
Response Time | 150 ms |
Emissivity | 0.1 to 1.1 |
Repeatability | +/-0.5% |
Output | 0 to 5 V DC |
Supply Voltage | 24 V DC |
Interface | RS232 |
IP Rating | IP65 |
Additional Information:
Product Details:
Model/Type | RAYMI31002MSF3 |
Brand | RAYTEK,FLUKE |
Voltage | 24VDC |
Range | 400 TO 1800C |
Usage/Application | all temp application |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
DC Voltage | 600 V |
Brand | Fluke |
AC Voltage | 600 V |
Frequency | 5.0 Hz to 500.0 Hz |
Accuracy | 2 % +/- 5 digits |
Contact Temperature | -10.0 Degree C to 400.0 Degree C |
Weight | 283 g |
DC Current Range | 40.00 A/400.0 A |
AC Current Range | 40.00 A/400.0 A |
Dimensions | 207 x 75 x 34 mm (H x W x D) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Resistance | 0.01 to 20.00 k |
Brand | Fluke |
AC DC Voltage | 0.1 V to 600 V |
Current | 200 mA |
Insulation Test Range | 1507 0.01 M to 10 G; 1503 0.1 M to 2000 M |
Insulation Test Voltages | 1507 50 V, 100 V, 250 V, 500 V, 1000 V; 1503 500 V, 1000 V |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Laser Type | 635 nm, Less than 1 mW |
Dimensions | 116 x 53 x 33 mm (L x W x D) |
Protection Class | IP40 |
Automatic Power Off | After 180 seconds |
Maximum Altitude | 3000 m |
Maximum Relative Humidity | 85% at 20 Degree F to 120 Degree F (-7 Degree C to 50 Degree C) |
Temperature Range | -25 Degree C to +70 Degree C, 0 Degree C to +40 Degree C |
Brand | Fluke |
Automatic Laser Off | After 90 seconds |
Compare models and find the meter that fits your job best.
Fluke 414D | Fluke 419D | Fluke 424D | |
---|---|---|---|
Maximum Measurement Distance | 50m (165ft) | 80 m (260 ft) | 100 m (330 ft) |
Accuracy | ± 2 mm | ± 1 mm | ± 1 mm |
(± 0.08 in) | (± 0.04 in) | (± 0.04 in) | |
Battery Life | 3000 | 5000 | 5000 |
Area measurement | Yes | Yes | Yes |
Volume measurement | Yes | Yes | Yes |
Pythagoras calculations | 1 2 | Full | Full |
Plus and minus calculations | Yes | Yes | Yes |
Measurement storage | 5 results | 20 complete displays | 20 complete displays |
Backlight | No | Yes | Yes |
Minimum/Maximum | Yes(Pyth) | Yes | Yes |
Audible Keypad Feedback | - | Yes | Yes |
Tripod mount | - | Yes | Yes |
Corner angle measurement | - | - | Yes |
Stake out | Yes | Yes | |
Dust and splash proof | IP40 | IP54 | IP54 |
Compass | - | - | Yes |
Inclination Sensor | - | - | Yes |
Display | 2 line | 3 line | 4 line |
Automated End-piece Correction | - | Yes |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Fluke |
Frequency | 50/60 Hz |
Power Supply | Battery type 1.5 V Alkaline AA MN 1500 or IEC LR6 x 6 |
Display | Color transmissive LCD 320 x 240 pixels (70 mm diagonal) with 2 level backlight |
Battery Life Typically | Greater than 10 hours (backlight on full), 12 hours (backlight reduced) |
Battery Eliminator | Input110/230 V |
Battery Eliminator Output | 15 VDC, 300 mA |
Reference Conditions | All accuracies stated at 23 Degree C +/-1 Degree C (73.4 Degree F +/-1.8 Degree F) |
Operating Temperature | 0 Degree C to 50 Degree C |
Temperature Coefficient of Current | Less than or equal to +/-0.15% of rdg per Degree C |
Temperature Coefficient of Voltage | Less than or equal to 0.15% of rdg per Degree C |
Maximum Relative Humidity | 80% for temperatures up to 31 Degree C (87 Degree F) |
The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics.
The multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit.
Besides effectively performing basic tasks like measuring power and power factor, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.
Specifications | ||
Display | Color transmissive LCD 320 x 240 pixels (70 mm diagonal) with 2 level backlight | |
Power supply | Battery type 1.5 V Alkaline AA MN 1500 or IEC LR6 x 6 | |
Battery life typically | > 10 hours (backlight on full) > 12 hours (backlight reduced) | |
Battery eliminator | Input | 110/230 V 50/60 Hz |
Output | 15 VDC, 300 mA | |
Ambient conditions (for indoor use only) | ||
Reference conditions | All accuracies stated at 23°C ±1°C (73.4°F ±1.8°F) | |
Operating temperature | 0°C to 50°C (32°F to 122°F) | |
Temperature coefficient of current | ≤ ±0.15% of rdg per °C | |
Temperature coefficient of voltage | ≤ ±0.15% of rdg per °C | |
Maximum relative humidity | 80% for temperatures up to 31°C (87°F) decreasing linearly to 50% relative humidity at 40°C (104°F) | |
Additional Information:
Product Details:
Brand | Fluke |
Model | IR 62 Max |
Temperature Range | -30 to +650 Degree C |
Additional Information:
Product Details:
Brand | Fluke |
Body Material | ABS Plastic |
Conductor Cable | 3,000 feet (915 meters) |
Screen Type | LED |
This easy-to-use, competitively priced tester is three tools in one—a cable fault locator, a cable & wire manager and a tone generator with SmartTone™ technology.
From just ONE END of any two or more conductor cable you can measure up to 3,000 feet (915 meters). The TS 100 cable fault locator lets you easily find the distance to opens or shorts on electrical wire, telephone wire, security wire and coax. Results appear as a distance reading rather than a waveform, so it's perfect for technicians unfamiliar with Time Domain Reflectometery (TDR) fault locator.
Locate and fix cable fault problems without pulling new wire or blindly cutting into walls. Intermittent faults are easier to find because the cable fault locator unit constantly measures while "On".
The TS 100 cable fault locator is perfect for inventory management of cable stock in trucks and warehouses and it can help you generate more accurate bids for jobs by quickly assessing needs and managing the cable stock with greater accuracy.
The TS 100 cable fault locator with patented SmartTone technology gives you 5 distinct tones to use for exact wire and pair identification, even in proximity to current-bearing cable.
When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair.
Voltage detection in the cable fault locator unit will immediately sound an alarm if you accidentally clip onto an energized pair, up to 250VAC.
TS® 100 Cable Fault FinderAn easy-to-use cable fault locator, cable and wire manager and tone generator:
Additional Information: