Rishabh Instruments

Product Details:

RISHABH 410 digital multimeter is suited for universal, general applications in the electrical and electronics fields, as well as in radio and television service, training and education. It is of especially pocket size design, and thus fit into pocket. The protective cover, which is provided as standard equipment, can be opened at an angle for convenient reading from the workbench, and .

Hold:
By pressing the HOLD key, the currently displayed measurement value can be held and “HOLD” is simultaneously displayed.

Relative Measurement:
By pressing the REL key, the zero correction is made and Relative Value is measured. All functions can measure Relative Value except Hz/Duty.

Automatic/Manual Measuring Range Selection:
The measurement functions are chosen with the rotary selector switch. The measuring range is automatically adjusted to the measurement value. The measuring range can also be manually selected with the AUTO/MAN button.

Hz/Duty:
The instrument can measure frequency (Hz) and duty cycle (%) of the AC Voltage by pressing Hz/Duty key.

Temperature Measurement:
RISHABH 410 allows you to measure temperature with “ K ” type 0 0 Thermocouple (Ni Cr-Ni) sensor in the range from 0 C to +1300 C.

Diode And Continuity Testing:
This provides for the testing of the polarity of diodes, as well as inspection for short-circuits and circuit interruptions. In addition to the display, resistance of less than approx 55 ± 2.5 are indicated with an acoustic signal

Additional Information:

• Item Code: 410
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand

Product Details:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier

Product Details:

Application:
RISH Max-10 digital multimeters are suited for universal, general applications in the electrical and electronics fields, as well as in radio and television service, training and education. They are of especially flat design, and thus fit into any bag. The protective cover, which is provided as standard equipment, can be opened at an angle for convenient reading from the workbench, and provides for easy transport.

Product Features:

Hold:
By pressing the HOLD/ON key, the currently displayed measurement value can be held and “HOLD” is simultaneously displayed

Relative Measurement:
By pressing the REL key, the zero correction is made and Relative Value is measured. All functions can measure Relative Value 0 except Hz/Duty, Diode, Continuity and C functions.

Automatic/Manual Measuring Range Selection:
The measurement function are chosen with the rotary selector switch. The measuring range is automatically adjusted to the measurement value. The measuring range can also be manually selected with the AUTO/MAN button.

Temperature Measurement:
Rish Max - 10 allows you to measure temperature with “K” type 0 Thermocouple (NiCr - Ni) sensor in the range from 0C0 to +1300 C.

Diode And Continuity Testing:
This provides for the testing of the polarity of diodes, as well as inspection for short -circuits and circuit interruptions. In addition to the display, resistance of less than 100 W(approx.) are indicated with an acoustic signal.

Energy Saving Circuit:
The instrument is switched off automatically, if none of the operating elements have been activated for about 15 minutes

Protective Cover For Rough Operating Conditions:
A protective cover of ABS with a built-in stand protects the instrument against jolts and falls. It also secures the test probe for one-hand operation, and allows for winding of the measurement cable which provides protection during transport.

Additional Information:

• Item Code: 10
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand

Product Details:

Application:
It is Analog Digital Multimeter which measures VAC, VDC, VAC+DC,Frequency, mA DC, mA(AC+DC), Resistance, continuity, Diode, Farad, AC current measurement.

Automatic Terminal Blocking System:
The automatic Terminal blocking system prevents incorrect connection of the test leads and incorrect selection of the measured quantity. This reduces danger to the user, the meter and the system to a remarkable extent.

Interface And Software RISH com 100:
The multimeters are fitted with a serial RS-232 C interface via which the measured values can be transmitted to a PC. These values, electrically isolated, are transmitted to the attachable interface adaptor with infrared light through the case.

MIN/MAX Value Storage:
In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated and stored.

Indication Of Negative Values On The Analog Scale:
When measuring DC quantities, also negative values are shown on the analog scale so that variations of the measured value can be observed at the zero point.

Additional Information:

• Item Code: RISH12S-14S-16S
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand
• Delivery Time: 1 day

Product Details:

Features:

• Display with low battery voltage
• Display with sound signal on
• Symbol for “CONTINUOUSLY ON”
• Digital display with indication of decimal point and polarity 5
• Display with manual range selection as well as with data and MIN/MAX hold
• Display of the selected function
• Display of the unit of measurement
• Display with overrange
• Pointer for analog indication
• Scale for analog indication
• Indication that negative analog range is exceeded
• Display of the unit 0C when measuring temperature
• Display with time counter switched on

Additional Information:

• Item Code: RISH-18S
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand
• Delivery Time: 1 day

Product Details:

Application:
RISH MIT 30 is Analog Digital Multimeter with insulation resistance measurement , which measures VAC, VDC, VAC+DC,Frequency, mA DC, mA AC+DC,Resistance, continuity, Diode, Farad, AC current measurement with clip-on sensor and insulation resistance measurement.

Insulation Resistance Measurement Up To 3G:
Insulation resistance measurement up to 3G with Testvoltages selection: 50 V, 100V, 250V, 500V and 1000V.

Route Mean Square Value With Distorted Wave form:
Measuring principal employed permits the measurement of rout mean square value (TRMS) OF AC quantities and mixed quantities (AC and DC) regardless of wave form.

AC Current Measurement With Clip-On Sensor:
Current measurement up to 300A with clip-on sensor having ratio1mv/10mA.

Min/Max Function:
By pressing min/max button instrument will start recording minimum and maximum readings.

Auto Power Off:
In order to save the power of the Batteries, the meter will automatically shut OFF if it detects no activity for 10 minutes.

Continuity Test:
This permits resting for short circuit and open circuit. In addition to the display, a facility of sound signal is available.

AUTO and MANUAL Ranging Modes:
In AUTO ranging mode the instrument automatically selects the range with best resolution depending on the applied input. In MANUALranging mode range is user selectable using MAN key

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand

Product Details:

Application:
RISH Clamp 1000A/300A measures important electrical parameters like AC Current, AC Voltage, DC Voltage. It also features Capacitance, Ohm & Continuity, frequency, Dutycycle and temperature measurement.

Product Features:

• Rotating clamp jaws facilitate the measurement at physically awkward positions, vertical bus bars, conductors placed at npositions difficult to access.
• Clamp jaws can be opened or closed with the trigger placed at bottom side away from the jaws. This allows the user to place his/her hand at safer distance from live conductor. This greatly nreduces exposure of human beings to electrical shocks Location and design of trigger eliminates fatigues caused by single finger operation.
• It allows spreading the force required to open the jaws over more than one finger to ensure ncomfortable operation.
• Comfortable operation of push buttons and function selector switch, in adverse field conditions.

Large Jaw Opening:
Rish Clamp 1000A: Jaw opening of 55mm for standerd wire diameter of 50mm Rish 300A: Jaw opening of 44mm for standerd wire diameter of 40mm

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand
• Delivery Time: ready

Product Details:

Application:

• Measurement of the insulation resistance on electrically dead equipment and systems with test voltages up to 1000V.
• For Testing Motors, Transformers, generators, switchgear
• For testing of House hold appliances
• Measurement of the insulation resistance of Cables.
• Very useful for on- site maintenance and service departments

Features:

Analog + Digital Display:
The Analog scale for insulation resistance measurement is Logarithmic in nature which gives the dynamic performance of an Analog insulation tester. The Analog scale is linear for low Ohm and Voltage measuremen

User Selectable Backlit Display:
The instrument is provided with user selectable Back lit for taking measurements in dark areas/poor lighting conditions.

Connector jack for External Mains Adapter:
The instrument can be operated from Mains Supply(230VAC) instead of Batteries using an external Mains Adapter.

Additional Information:

• Item Code: INSU10-20
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand