Serial Converter

Product Details:

Description:

• RS -485 Signal to 4 4 ways 2 wires (A,B) RS -485 signal in the high rate with photo electrical isolation

Additional Information:

• Item Code: MWE-485-H4
• Port of Dispatch: courier,hand
• Delivery Time: ready

Product Details:

We are dealing in the Communication and Instruments Products.

MWE485-YGM is three sides opto-isolation repeater. It can converter RS485 serial port signal to RS422 signal and extend RS-485/422 network coverage.

Main function:

• Either Half duplex RS-485 or full duplex RS-422 select;
• Industry level design, excellent import element chosen

Attention:

• The RS-485 is difference-signal. It is necessary to add a 120Ω Matching resistor on the head and end of the communications circuit. When 120 short films(ON), The load ability will reduce when using the matching resistance. We suggest that it is necessary to use it only when the rate is above 19.2Kbps or the circuitry length is above 200m.

Additional Information:

• Item Code: MWE-485-YGM
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Hand, By Courier
• Delivery Time: Ex-stock

Product Details:

ATC-1000M: TTL 1 PORT NETWORKING EMBEDDED MODULEATC-1000EVB: 1 PORT NETWORKING EVOLUTION BOARDATC-1200: 1 PORT NETWORKING CONVERTER

Additional Information:

• Item Code: ATC1200
• Delivery Time: 2-3 DAYS

Product Details:

Additional Information:

• Item Code: ATC-107N
• Delivery Time: 2-3 DAYS

Product Details:

ATC-2000WF Series of wireless serial device servers give you an easy way to connect your RS-232/422/485 serial devices to a WLAN. The 1-port ATC-2000WF and 2-port ATC-2002WF are ideal for environments where a LAN is not available, or where serial devices are moved frequently.

The RS232 connection application has been used for a long time. RS232 cable has limitations in distance. WLAN (Wireless Local Area Network) has become a worldwide standard protocol for wireless applications. There are many applications for using RS232 connection over WLAN, including POS, data capture, telemetry, PLC controllers, remote control, vending machine, industrial control, and others. The device that supports connection over WLAN is called as Wireless to Serial Server. Through out the guide, the 802.11g Wireless to Serial Server will be referred as the“Server”. ATC-2000WF wireless serial device servers support automatic IP configuration protocols (DHCP, BOOTP) and manual configuration via a handy web browser console. Both IP configuration methods ensure quick and effective installation, An external antenna increases the range of the wireless connection. Users can position the adjustable antenna for maximum signal strength or even replace the antenna with their own for additional flexibility and scalability. This feature is particularly useful when a serial device is connected in a high interference area. As an added feature, a signal strength indicator is located on the front panel to make it easier to troubleshoot connection Problems. ATC-2000WF wireless serial device servers ensure the compatibility of network software that uses a standard network API by providing TCP Server Mode, TCP Client Mode, and UDP Mode. The Real COM/TTY drivers allow software that works with COM/TTY ports to be set up to work over a TCP/IP network in no time. This excellent feature preserves your software investment and lets you enjoy the benefits of networking your serial devices instantly. To make your management task easier, the ATC-2000WF provides additional features, such as password authentication, IP filter, WEP support for 64-bit and 128-bit encryption, and SNMP support. 

Additional Information:

• Item Code: ATC-2000WF
• Delivery Time: 2-3 DAYS

Product Details:

Additional Information:

• Item Code: ATC3002
• Delivery Time: 2-3 DAYS

Product Details:

We are dealing in Converters

RS-232 to RS-485/RS-422

The MWE485-C can convert a RS-232 serial port signal to a two wires semi duplex RS-485signal or a four wires full duplex RS-422 signal.

RS-232 to RS-485/RS-422

Additional Information:

• Item Code: MWE-485C
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

The MWE485-A can convert a 3 wires (RX, TX, GND) RS-232 serial port signal to a semi duplex RS-485 signal. It use technology of stealing current from serial port, no need external power supply

Description:

• The MWE485-E can convert a RS-232 serial port signal to a two wires semi duplex RS-485 signal or a four wires full duplex RS-422 signal,with 2500V photo electricity isolation.
• Product characteristic.
• Technology of stealing current from serial port, no need external power supply.
• Particular protecting circuit for the serial port, plus-and-play supported.
• Automatically transmit with no delay, no need CTS flow control.

Additional Information:

• Item Code: MWE-485-A
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Courier,By Hand
• Delivery Time: Ex-stock

Product Details:

The MWE485-A can convert a 3 wires (RX,TX,GND) RS-232 serial port signal to a semi duplex RS-485 signal. It use technology of stealing current from serial port, no need external power supply.

Additional Information:

• Item Code: MWE485-A
• Port of Dispatch: courier,hand

Product Details:

The MWE485-TTL can convert the TTL signal into two wires half-duplex RS-485 port

Main function:

• Plus and minus logic of TTL signal can be chosen
• Particular protecting circuit for the serial port, plus and play supported
• Particular technique of serial port power getting of 90% high efficiency

Additional Information:

• Item Code: MWE-485-TTL-G
• Port of Dispatch: Courier, By Hand
• Delivery Time: EX-stock

Product Details:

The MWE485-D can convert a RS-232 serial port signal to a two wires semi duplex RS-485signal or a four wires full duplex RS-422 signal with 2500V photo electricity isolation.It need a5V DC power supply.

Features

RIUP, Serial Circuit Protection
Anti-lightning protection,anti-static protection
Baud rate self-adaption
RS485 to rs232

Specifications:

RS232 To RS485 Industrial Serial Converter

MWE485-A/B/C/D/E/TD
1. RS485:two-wire Half-Duplex, RS422 four-wire Full-duplex
2. RIUP, Serial Circuit Protection
3. Built-in intelligent module, Auto recognise RS485 Signal
4. Signal Line: 600W/ms Anti-lightning protection, 15Kv anti-static protection
5. Transparent transmission, Baud rate self-adaption
6. Industrial Design
7. Max Nodes: 128--(MWE485-A/B/C/D/TD)

8. LED Lights

Additional Information:

• Item Code: MWE_485A
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Courier, By Hand
• Delivery Time: EX-stock

Product Details:

ATC-863: RF MODULE >300METER,ATC-871: RF MODULE >500METER,ATC-873: RF MODULE >1000METER,ATC-875: RF MODULE >1000METER,

ATC-873 wireless digital transmission module offers standard RS-232, RS-485 and UART/TTL level interfaces for direct connection with computers, use's RS-485 equipments, SCM or other UART parts.

ATC-873 has adopted half duplex communication channel most suitable for point to multi-point communication mode. The primary station takes full control of communication harmony, and adopts data frames with address codes for data or command transmitting. The secondary station shall fully receive them and select response by comparing address codes; all the work shall be fulfilled by upper layer protocols, which shall ensure that only one wireless module in the communication network is in the transmitting state in any instant to avoid mutual interference.

Therefore, the transmission channel built by ATC-873 is transparent to the user. ATC-873 can also be applied to point to point communication, making it easier and smoothly upgrade wire (RS232/485/TTL) transmission mode in original system.

1, low power data transmission.
2, visual distance transmission distance up to 300 m (863), 500 m (871), 1 km (873), 2 km (875).
3, based on FSK/GFSK way of debugging, efficient communication protocols, good reliability, low bit error rate.
4, data transparent transmission, transmission is longer than the data frame.
5, colleagues provide RS - 232 / RS - 485 / TTL level interface, optional I/O port.
6, can be used to point to point, point to many, many to point communication mix a variety of ways.
7, only data control, users need extra program.
8, carrier frequency 433 MHZ, also can provide 315/868/915 MHZ carrier frequency.
9, watchdog fact monitoring, an external antenna is optional.

Additional Information:

• Item Code: ATC873
• Delivery Time: 2-3 DAYS

Product Details:

we are dealing in ATC Converter
ATC-106

Specification:

• The ATC-106 converts a DB9 RS232 female connection .
• DB9/4 position terminal block RS485 half duplex connection. The ATC-106 is non-isolated and derives power from the RS232 TX/RX signals.

Additional Information:

• Item Code: ATC-106
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Courier, By Hand
• Delivery Time: EX-stock

Product Details:

Specification:

• RS232 DB9 signals to either RS485 or RS422 with isolation.
• DTE/DCE and RS422/RS485 are switch selectable.
• LED indication for TX and RX signals. Wall AC power supply included.

Additional Information:

• Item Code: ATC-105
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Courier, By Hand
• Delivery Time: EX-stock

Product Details:

Additional Information:

• Item Code: ATC3200
• Delivery Time: 2-3 DAYS

Product Details:

ATC-2000: 1-SERIAL PORT DEVICE NETWORKING CONVERTERATC-2004: 4 PORT DEVICE NETWORKING CONVERTERATC-2000M: TTL INTERFACE 1 PORT NETWORKING EMBEDDED
ATC-2000EVB: 1 PORT NETWORKING EVOLUTION BOARD

Additional Information:

• Item Code: ATC2000
• Delivery Time: 2-3 DAYS

Product Details:

Additional Information:

• Item Code: ATC-102
• Delivery Time: 2-3 DAYS

Product Details:

Additional Information:

• Item Code: ATC131
• Delivery Time: 2-3 DAYS

Product Details:

Rs-232/Rs-485/Rs-422 to Fiber Optic Signal Mode Converter. Convert a 3 Wires(RX,TX,GND)Rs-232 Serial Port Signal or 2 Wires RS-485 or 4 wires Rs-422 Serial port signal to Fiber Optic Port Signal.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Hand,By Courier
• Delivery Time: Ex-stock

Product Details:

Specifications

• RS232 to 485
• Serial Circuit Protection
• lightning protected,ESD protection
• Baud rate self-adaption
• Industrial Design

Features:

• RS485:two-wire Half-Duplex, RS422 four-wire Full-duplex
• Serial port Circuit Protection, hot-pluggable
• Built-in intelligent module, Auto recognise RS485 Signal
• Transparent transmission, Baud rate self-adaption
• Industrial Design
• Max Nodes: 128--(MWE485-A/B/C/D/TD) (MWE485-E)

Additional Information:

• Item Code: MWE485-YG
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: Courier, By Hand
• Delivery Time: EX-stock

Product Details:

Features:

• Channel RS232/RS422/RS485 Industrial data optical transceiver MWF201
• It could protect equipment avoid loop voltage, surge, induction lightning stroke. Static electricity and hot swap.
• Transparent transfer, baud rate adaptive, no need to change protocol
• Industrial level design, all surface adhibit technique

Specifications:

Product Details:

Introduction:

ATC-277 SM is a kind of multi-function serial port to fiber optic
MODEM converter.It is the best solution for remote terminal unit (RTU)
connect to HOST or a distributed data acquisition system (SCADA)
controller.This product uses optical fiber as transmission medium, to
improve the system transmission performance.Effectively avoid bad
environment of communications equipment.Such as the lightning, surge
and electromagnetic interference.

Features:

Support "point-to-point" mode.
Support SM mode fiber with SC or ST interfaces
RS-232/422/485 3-in-1 interface
Extend serial communication distanc
600W lightning protection for all RS232 signal line,
1000W lightning protection for all RS485 signal line
Small size and support DIN rail for easy installation
Isolation protection, reduce electrical interference

Order Information:

ATC-277SM SC RS-232/485
ATC-277SM ST RS-232/485

 

Optical Fiber Port
Interface: SC or ST
Fiber requirements: 50/125μm,100/140μm,200μm.
Transmission distance: SM:20 km,MM:2km
Wavelength: SM:1310 nm,MM:850 nm
Coupled Power Budget: 12.1 dB
Point to point transmission: half-duplex and full-duplex

RS-232/485/422 Port
Interface: DB9-DTE (Male) for RS-232.
6-bit terminal connector for RS-485/422.
RS-232: TXD,RXD,GND
RS-485: 485+,485-
RS-422: TX+,TX-,RX+,RXBaud
rate¿¿¿300bps ~ 250.4kbps
Lightning protection¿¿¿RS-232: each line 600W
RS-485/422: each line 1000W

Physical Specifications
Shell: iron (1 mm)
Size: 100mm × 86mm × 26 mm
Weight¿¿¿0.60kg¿¿¿full package¿¿¿
Operating temperature: -20°C to 70°C
Storage temperature: -40°C to 80°C
Working humidity: 5 ~ 95% RH
Power supply: 9-24VDC @ 250mA max

Additional Information:

• Item Code: ATC277SM
• Delivery Time: 2-3 DAYS

Product Details:

The MWE485-TD is high speed opto-isolation. It can converter a RS232 serial port signal to two wires high speed semi duplex RS485 or a four wires full duplex RS422 signal, with 2500V photoelectricity isolation
Din Rail Converter.

Additional Information:

• Item Code: MWE-485-TD
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: By Hand,By Courier
• Delivery Time: Ex-stock

Product Details:

ATC-277 MM is a kind of multi-function serial port to fiber optic MODEM converter.It is the best solution for remote terminal unit (RTU) connect to HOST or a distributed data acquisition system (SCADA) controller.

  This product uses optical fiber as transmission medium, to improve the system transmission performance.Effectively avoid bad environment of communications equipment.Such as the lightning, surge and electromagnetic interference.

Introduction
ATC-277 MM is a kind of multi-function serial port to fiber optic MODEM converter.

It is the best solution for remote terminal unit (RTU)connect to HOST or a distributed data acquisition system (SCADA) controller.

This product uses optical fiber as transmission medium, to improve the system transmission performance.Effectively avoid bad environment of communications equipment.Such as the lightning, surge and electromagnetic interference.

Features:

Support "point-to-point" mode.
Support MM mode fiber with SC or ST interfaces
¿¿¿      RS-232/422/485 3-in-1 interface
¿¿¿      Extend serial communication distance
        MM mode is 2km (ATC-277MM)
¿¿¿      Serial Baud Rate¿¿¿RS-232 300 to 115.2KBPS
        RS-422/485 300 to 230.4KBPS
600W lightning protection for all RS232 signal line,
1000W lightning protection for all RS485 signal line
Small size and support DIN rail for easy installation
Isolation protection, reduce electrical interference

Point-to-Point Work Mode

 

Order information

1.ATC-277MM SC Connecting Port RS-232/485
2.ATC-277MM ST Connecting Port RS-232/485

Additional Information:

• Item Code: ATC277MM
• Delivery Time: 2-3 DAYS

Product Details:

Specifications

MeetsIEEE802.3u 100BaseTX
100BaseFX standards

0/100M Ethernet Media Converter & Bi Directional 0/100M Ethernet Media Converter & Bi Directional

• MeetsIEEE802.3u 100BaseTX
• 100BaseFX standards
• Plug-and-Play installation
• Auto-Negotiation for 10/100M TP port speed
• High quality and excellent reliability
• Full-duplex 100Mbps Ethernet operation up to 120Km
• Two RJ45 ports for installation easily
• 9 diagnostic and monitoring LEDs for the status of power, FX link/ACT, TX link/ACT
• Half-duplex and full-duplex identify automatically
• Stand-alone with external power adapter

 

Additional Information:

• Item Code: NMC3301
• Delivery Time: 2-3 DAYS

Product Details:

Modbus TCP and Modbus RTU is an industry adopted

communication protocol that is based on RTU protocols for various of applications; These two protocols are commonly used by a lot of equipment in the industry.Such as DCS, PLC, HMI, I/O module, Power meters, various sensors and measuring instruments. ATC-1300 support the standard Modbus protocol and is capable of converting the Modbus protocols between Modbus TCP (Master) to Modbus RTU(Slave). It’s a simple and cost effective Modbus Gateway.

ATC-1300 which support three most commonly used serial communication interfaces, RS-232, RS-422 and RS-485. It also provides a web-based configuration UI, so the users can select the serial interface easily.

 

RS-232/422/485 3 in 1 interface

Support 10/100Mbps Ethernet port

Supports 4-wire and 2-wire RS-485 work mode

Automatic data direction control on RS-485

Supports 24VDC industrial power supply

Terminal block easily for RS-422/485 installation

Configure via webpage and windows utility

Supports virtual serial port,TCP Server/Client and UDP work mode

Built-in watchdog

CE, RoHS and FCC Certifications

Additional Information:

• Delivery Time: 2-3 days

Product Details:

We are dealing in can bus converter import this

Additional Information:

• Item Code: CAN-BUS
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: courier,hand

Product Details:

we are deal in all type of Converters
Usb to RS-232
Usb to RS-485 
Usb to RS-422
Usb to RS-485/RS-422/RS-232
Serial to Ethernet converter
RF to Serial converter

Additional Information:

• Delivery Time: ready stock

Product Details:

we are dealing in ATC convertrs

Industrial high speed ARM process.

Frequency Range: GSM 850/ 900 /1800 /1900 MHz

Baud rate Range: 1200 to 115200 bps, UART sup RS232 /RS485.

Built - in watch dog.

Remote dormancy and awakening by phone message.

Configure the GSM Modem by serial port.

Control via AT commands.

Additional Information:

• Item Code: ATC-3101
• Delivery Time: 2-3 days

Product Details:

Similar products

Additional Information:

• Item Code: ATC1204
• Delivery Time: 2-3 DAYS

Product Details:

Additional Information:

• Item Code: ATC155
• Delivery Time: 2-3 DAYS

Product Details:

Additional Information:

• Item Code: ATC109N
• Delivery Time: 2-3 DAYS

Product Details:

ATC-405 IS MANAGEMENT ETHERNET SWITCHATC-405U IS UNMANAGEMENT ETHERNET SWITCH
ATC-405 integrates a 5-port switches controller, SSRAM, and 5 10/100 Ethernet transceivers. Each of the transceivers compliers with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The DSP approach is utilized for designing transceivers with 0.16um technology; they have high noise immunity and robust performance. ATC-405 operates in store and forward mode. ATC-405 have a lot of rich feature for different application, include router application, firewall, IEEE 802.1Q, IGMP snooping, policy-based QoS. It provides powerful QoS function, include traffic policy, traffic meter, and flexible queue scheduling (WRR/WFQ/SP). In virtual LAN, ATC-405 support port-based VLAN and IEEE 802.1Q tag-tagged VLAN (up to 16 VLAN groups). ATC-405 support up to 2K MAC addresses. The address table can configure either “2K unicast addresses” or “1K unicast addresses and 1K multicast addresses“. The Multi-Field classification is powerful classifier (layer2 to layer 4 packet headers) in packet classification. The classifier divides incoming packets into multiple classes based on prescribed rules. Each traffic class from classifier can drop out-of-profile packets, monitor traffic, specify forwarding behavior, and specify output queue.

Additional Information:

• Item Code: ATC405

Product Details:

Our products are widely use in commerce,banking, insurance, security, smart cards and other industries, the company sold products, complete, cost-effective, timely and thoughtful service. ATC-408 is aneight-managed industrial Ethernet switches, it has10Base-T and 100Vase-TX Ethernet, full / half duplexmode, eight Ethernet ports MDI / MDI-X adaptiveconnection, products for small businesses, security systems, bank management, and so on.

Additional Information:

• Item Code: ATC408
• Delivery Time: 2-3 DAYS

Product Details:

Additional Information:

• Item Code: ATCW3100G
• Delivery Time: 2-3 DAYS